Power supplies and accessories - Fonolukk https://fonolukk.eu/product-category/intercoms/rainmann-laskomex-2/power-supplies-and-accessories-5/ Smart Security Systems Sat, 10 May 2025 10:31:02 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://fonolukk.eu/wp-content/uploads/2020/04/cropped-Снимок-экрана-2020-04-09-в-23.24.14-2-32x32.png Power supplies and accessories - Fonolukk https://fonolukk.eu/product-category/intercoms/rainmann-laskomex-2/power-supplies-and-accessories-5/ 32 32 Power supply: 15VDC, 1.6A, 24W https://fonolukk.eu/product/power-supply-15vdc-1-6a-24w/ Tue, 15 Apr 2025 15:46:51 +0000 https://fonolukk.eu/?post_type=product&p=20160 Parameter Value Dimensions 69.4 × 30 × 64.1 mm Colour Black Compliance Energy Efficiency Level VI Connector Type Straight Country-Specific

The post Power supply: 15VDC, 1.6A, 24W appeared first on Fonolukk.

]]> Parameter Value Dimensions 69.4 × 30 × 64.1 mm Colour Black Compliance Energy Efficiency Level VI Connector Type Straight Country-Specific Connectors Europe Efficiency 86.19% Output Connector Type 5.5 / 2.1 mm Power Supply Type Plug-in Output Cable Length 1.5 m Manufacturer POS Manufacturer Series POSC Max Output Current 1.6 A Operating Modes Constant Voltage Operating Temperature -5 to +40 °C Output Voltage 15 V DC Polarity Positive inner pin Power 24 W Protection Short Circuit Protection (SCP) Input Voltage Range 90–264 V AC Power Supply Technology Switching

The post Power supply: 15VDC, 1.6A, 24W appeared first on Fonolukk.

]]> DA-1 surface casing, one section Black https://fonolukk.eu/product/da-1-surface-casing-one-section-black/ Thu, 13 Jul 2023 13:42:41 +0000 https://fonolukk.eu/?post_type=product&p=15513 One section casing to outdoor panels made of galvanized sheet painted with powdery coating. The casing is available black and

The post DA-1 surface casing, one section Black appeared first on Fonolukk.

]]>

One section casing to outdoor panels made of galvanized sheet painted with powdery coating. The casing is available black and silver.

 

The post DA-1 surface casing, one section Black appeared first on Fonolukk.

]]> KAM-3P camera module https://fonolukk.eu/product/kam-3p-camera-module/ Thu, 13 Jul 2023 10:31:24 +0000 https://fonolukk.eu/?post_type=product&p=15499 KAM-3P modules are designed for outdoor panels used in digital video systems CD-2502 and CD-3100. By default, panels are made

The post KAM-3P camera module appeared first on Fonolukk.

]]> KAM-3P modules are designed for outdoor panels used in digital video systems CD-2502 and CD-3100. By default, panels are made in the audio version, however, they are adjusted to have a camera module mounted and to be used in the video version The module consists of a color camera and PCB board with an impedance transformer, which is mounted on a metal base. Kam-3P module design enables to adjustment of the camera position. The modules are designed for different types of outdoor panels and they differ in the method of attaching in the panel.

  • KAM-3P Module to outdoor panels made of galvanized sheet painted with powdery coating.

The post KAM-3P camera module appeared first on Fonolukk.

]]> Laskomex ISD-02 programmer https://fonolukk.eu/product/laskomex-isd-02-programmer/ Sat, 06 Aug 2022 15:58:02 +0000 https://fonolukk.eu/?post_type=product&p=13807 [wpdm_package id='13816']

The post Laskomex ISD-02 programmer appeared first on Fonolukk.

]]>
  • ISD-02 interface allows for easy and convenient configuration of digital door phones CD-2502 and CD-3100 with the use of the PC computer.
  • It enables to reading of data directly from an electronic cassette or MLX memory module, which is used to transfer data between the ISD-02 interface and the electronic cassette mounted in the building. Data contain full information about CPU cassette configuration, including its serial number, combination lock codes, and electronic key numbers.
  • ISD-02 enables to write and read data containing door phone configuration to a file on the computer disc. This allows the installer to make copies of the configuration files and restore the CPU cassette settings if necessary (e.g., in case of failure of the electronic cassette).
  • Using readers in the ISD-02 interface the installer may register electronic keys (touch iButton and proximity RFID ones) in the door phone cassette. This operation may be done in his office, then mount a fully configured door phone system in the object.
  • The installer may register a set of special keys, designed for estate administrators and caretakers of technical services, etc. This set, written in a file, can be copied to other electronic cassettes. This allows the installer to set the appropriate permissions for keys that he does not physically own as they have been previously distributed to users.
  • ISD-02 enables to change of individual settings for rooms (the number of rings, the tone, and volume of calls, and the options for door release and combination lock).
  • The interface enables to change of parameters of the door phone work (calling options, door release operation, numbering modes, door phone functions).
  • If you change the numbering mode, take place automatic calculation of the logic numbers and corresponding to them physical numbers. This allows the installer to check whether the selected numbering mode meets his expectations and avoids confusion when programming unit phones.

    • The post Laskomex ISD-02 programmer appeared first on Fonolukk.

    ]]>         Laskomex SAPC15018EU 15V/1,2A DC https://fonolukk.eu/product/laskomex-sapc15018eu-15v-12a-dc/ Mon, 18 Jul 2022 17:12:01 +0000 https://fonolukk.eu/?post_type=product&p=13733 [wpdm_package id='13736']

    The post Laskomex SAPC15018EU 15V/1,2A DC appeared first on Fonolukk.

    ]]>     The post Laskomex SAPC15018EU 15V/1,2A DC appeared first on Fonolukk.

    ]]>         PW-2 call signaling module https://fonolukk.eu/product/pw-2-call-signaling-module/ Sun, 13 Jun 2021 11:19:23 +0000 https://fonolukk.eu/?post_type=product&p=11167 PW-2 call signaling module Module of additional call signaling with a relay output, for uniphones and monitors used in Laskomex

    The post PW-2 call signaling module appeared first on Fonolukk.

    ]]>

    PW-2 call signaling module

    Module of additional call signaling with a relay output, for uniphones and monitors used in Laskomex intercom systems.
    The module has an NO relay output, which is closed when the calling signal appears. Any signaling device supplied with 5 … 18V AC / DC 1Amax voltage can be connected to this output.
    Attention! Installation and commissioning of the module in the monitors must be performed by the Laskomex service. It is also recommended for uniphones!

    The post PW-2 call signaling module appeared first on Fonolukk.

    ]]>         Module of an additional button for LY-8 uniphone https://fonolukk.eu/product/module-of-an-additional-button-for-ly-8-uniphone/ Sun, 13 Jun 2021 10:59:41 +0000 https://fonolukk.eu/?post_type=product&p=11161 Module of an additional button for LY-8 uniphone The module allows you to control an additional device, e.g. a drive

    The post Module of an additional button for LY-8 uniphone appeared first on Fonolukk.

    ]]>

    Module of an additional button for LY-8 uniphone

    The module allows you to control an additional device, e.g. a drive for the entrance gate or lighting in the staircase. It can be installed in both new and already installed devices.

    The post Module of an additional button for LY-8 uniphone appeared first on Fonolukk.

    ]]>         LX-DK01 – module restoring the factory default code of the control panel https://fonolukk.eu/product/lx-dk01-module-restoring-the-factory-default-code-of-the-control-panel/ Sun, 13 Jun 2021 10:42:09 +0000 https://fonolukk.eu/?post_type=product&p=11155 LX-DK01 – module restoring the factory default code of the control panel. This module allows you to restore the factory

    The post LX-DK01 – module restoring the factory default code of the control panel appeared first on Fonolukk.

    ]]>

    LX-DK01 – module restoring the factory default code of the control panel.

    This module allows you to restore the factory installer code in the CD-2502 and CD-3100 control panels. Apart from restoring the code, the module does not change any other control panel settings – intercom operation parameters, coded lock codes, electronic key identifiers remain unchanged. The module can only be used in the control panels where the ISD-02 interface socket is installed.

    The post LX-DK01 – module restoring the factory default code of the control panel appeared first on Fonolukk.

    ]]>         MEZ-01 electromagnetic lock control module https://fonolukk.eu/product/mez-01-electromagnetic-lock-control-module/ Sun, 13 Jun 2021 10:23:37 +0000 https://fonolukk.eu/?post_type=product&p=11149 MEZ-01 electromagnetic lock control module The MEZ-01 module enables the connection of a reverse electric strike or electromagnetic lock (electromagnetic

    The post MEZ-01 electromagnetic lock control module appeared first on Fonolukk.

    ]]>

    MEZ-01 electromagnetic lock control module

    The MEZ-01 module enables the connection of a reverse electric strike or electromagnetic lock (electromagnetic lock) to the external panel in the CD-3100 intercom system. Thanks to it, you can also connect DC electric strikes, which is important when you want the electric strike to work silently (in the CD-3100 the operating frequency of the striker is 60Hz and it cannot be changed). Electric strike or electromagnetic lock connected with MEZ-01 requires an additional power supply.

    The post MEZ-01 electromagnetic lock control module appeared first on Fonolukk.

    ]]>         Gate control module MSB-02 https://fonolukk.eu/product/gate-control-module-msb-02/ Sun, 13 Jun 2021 10:10:08 +0000 https://fonolukk.eu/?post_type=product&p=11143 Gate control module MSB-02 The module makes it easy to connect the gate drive controller or another additional device to

    The post Gate control module MSB-02 appeared first on Fonolukk.

    ]]>

    Gate control module MSB-02

    The module makes it easy to connect the gate drive controller or another additional device to the intercom system. The module is controlled by the voltage on the BR control line and requires the use of uniphones or monitors with a button to control the additional device.

    The post Gate control module MSB-02 appeared first on Fonolukk.

    ]]>